Stamping Foil for Plywood (Also Called hot stamp foil,heat transfer foil,hot foil stamp)
Introduction
Using thermal transfer technology, directly transfer a variety of designs on the surface of middle and high-density fiberboard, solid wood,chipboard, and other materials. One-step finishing. The thickness of the foil is only 42-52mic and has no formaldehyde or any other volatile materials.is a new type of environmentally friendly Decorative Products.
We Guarantee our foils with the following performance:
Adhesive:Putting adhesive tape on "3cm squares area" stamped surface,and pulling this adhesive tape, paint must not flake.
Scratch Resistance:Taking paint-remover and rubbing it 120 times with a pressure of 2 K. G.Any paint wont be left.
Solvent Resistance:wipe stamped surface by a scrap of tampon smeared with mixed solvent.(TOL and MEK) as one time(up and down).Over 30times,the color wont fade.
TECHNICAL PARAMETER
Base film PET
Thckness of Base film 20-30mic
Thickness of foil 42-52mic
Stamping Temperature 160-180
Transfer Speed 4-5 M/min
Pressure 4-5Bar
Application
Siding,Edge sealing strip, Automotive (interior), Trophy and award plaques, Back splashes Door panels, Furniture, Kitchen cabinets, Exterior doors, Synthesized floor
Standard Size:
660mm(width) * 500m(length)/per roll
1320mm(width) * 500m(length)/per roll
Introduction
Using thermal transfer technology, directly transfer a variety of designs on the surface of middle and high-density fiberboard, solid wood,chipboard, and other materials. One-step finishing. The thickness of the foil is only 42-52mic and has no formaldehyde or any other volatile materials.is a new type of environmentally friendly Decorative Products.
We Guarantee our foils with the following performance:
Adhesive:Putting adhesive tape on "3cm squares area" stamped surface,and pulling this adhesive tape, paint must not flake.
Scratch Resistance:Taking paint-remover and rubbing it 120 times with a pressure of 2 K. G.Any paint wont be left.
Solvent Resistance:wipe stamped surface by a scrap of tampon smeared with mixed solvent.(TOL and MEK) as one time(up and down).Over 30times,the color wont fade.
TECHNICAL PARAMETER
Base film PET
Thckness of Base film 20-30mic
Thickness of foil 42-52mic
Stamping Temperature 160-180
Transfer Speed 4-5 M/min
Pressure 4-5Bar
Application
Siding,Edge sealing strip, Automotive (interior), Trophy and award plaques, Back splashes Door panels, Furniture, Kitchen cabinets, Exterior doors, Synthesized floor
Standard Size:
660mm(width) * 500m(length)/per roll
1320mm(width) * 500m(length)/per roll
Main Products
Hot Stamping Foil,thermal foil,heat transfer foil,MDF foil,Slab,Board