Specifications:
1) Raw material:
A) Rolling welded steel tube: 4.76 ~ 6.35 x 0.71
B) Low carbon steel wire: 1.4 ~ 1.6mm
C) Bracket: Steel plate SPCC thickness is 0.6~2.0
D) Base mounting plate: SPCC, thickness is 0.6~2.0
2) Technical standards: Can produce according to clients' drawing or samples
3) Performance:
A) Surface with electrophoresis coating to prevent the corrosion
B) Inner cleanness can meet the requirement of R134a and CFC cooling system
C) Can satisfy the cooling capability requirements
Structure:
Flat type of wire on tube condenser used at the back
Specification of E-coating:
1) Coating thickness:
A) Thickness of anodic electrophoresis coating ≥12μm
B) Thickness of cathodic electrophoresis coating ≥20μm
6) Corrosion resistant (salt spray GB2423)
A) Anodic electrophoresis coating ≥24h
B) Cathodic electrophoresis coating ≥96h
1) Raw material:
A) Rolling welded steel tube: 4.76 ~ 6.35 x 0.71
B) Low carbon steel wire: 1.4 ~ 1.6mm
C) Bracket: Steel plate SPCC thickness is 0.6~2.0
D) Base mounting plate: SPCC, thickness is 0.6~2.0
2) Technical standards: Can produce according to clients' drawing or samples
3) Performance:
A) Surface with electrophoresis coating to prevent the corrosion
B) Inner cleanness can meet the requirement of R134a and CFC cooling system
C) Can satisfy the cooling capability requirements
Structure:
Flat type of wire on tube condenser used at the back
Specification of E-coating:
1) Coating thickness:
A) Thickness of anodic electrophoresis coating ≥12μm
B) Thickness of cathodic electrophoresis coating ≥20μm
6) Corrosion resistant (salt spray GB2423)
A) Anodic electrophoresis coating ≥24h
B) Cathodic electrophoresis coating ≥96h
Main Products
Condenser and evaporator for refrigerator(fridge),freezer,cold cabinet