RF&Microwave passive components including terminations, attenuators, directional couplers, 3db hybrid, power dividers/splitters, filter, duplexer, combiner, waveguide, antenna, amplifier, feeder accessories, indoor signal coverage, POI, termination, fastening pieces, repeater, surge arrester etc.
Specifications
- Power divider
- Power dividers are passive devices that are designed to combine multiple antennas in stacked antenna systems, while providing a constant 50 ohm impedance over the bandwidth chosen.
- The advantages of this system are wider bandwidth and lower loss than that of odd multiple quarter wave cable trimming solutions. Custom trimming for best VSWR is time consuming.
- Power dividers provide simple, repeatable performance improvements for stacked antenna systems. Directive Systems power dividers, in addition, provide additional advantages.
- Ways: 2/3/4
- Frequency range: 800-2500
- Insertion Loss: not more than 0.4db/0.6db/0.7db
- Amplitude Balance: not more than 0.2/0.3/0.3
- Input VSWR: not less than 1.25/1.25/1.3
- Output VSWR: not less than 1.2/1.2/1.2
- Isolation: not less than 30W
- Power handling: not less than 30W
- Outline Size(mm): 75*46*20/94*77*20/94*77*20
- Port connector: N-female
- Operation Temperature: -40 celsius degrees+70celsius degrees
- Relatively Humidity: 5%-95%
- Surface color: sliver and black as per requirement
Certificate
- ISO9001
- RoHS and FCC
Main Products
RF&Microwave passive components including terminations